DelMarVa's Premier Source for News, Opinion, Analysis, and Human Interest Contact Publisher Joe Albero at alberobutzo@wmconnect.com or 410-430-5349
DelMarVa's Premier Source for News, Opinion, Analysis, and Human Interest Contact Publisher Joe Albero at alberobutzo@wmconnect.com or 410-430-5349
22 comments:
What temp. does lose it's structural integrity . Steel is weakened at high temp. when the molecular structure of the steel expands , as these expand the steel bends . I do believe that most of the damage was due to the floor falling onto the floor below causing a domino effect. However the news media will tell us anything they think we will bite on. Of course I will never forget , the problem is the younger people won't learn unles they are taught.
Ever wonder where the indestructible black boxes got to?
It wasn't just jet fuel burning. The chemical reactions produced by the fire were more than capable of reaching 4,000+ degrees - basic chemistry & physics.
How much steel was taken out by the impact of a heavy airliner traveling at several hundred miles an hour?
So....the jet fuel burning didn't set anything INSIDE the building on fire? It was only the jet fuel that was burning- not the desks, chairs, curtains, rugs, wallboard, plastic things (computers, monitors, etc)...
Who killed JFK? Why?
5:26 AM is correct and on the mark as well as 6:50AM. Just another thought about structural integrity. It is known fact that under extreme temperatures steel will lose a great deal of strength and cause failure. This is why the insurance rates are a lot lower for laminated wood beams as they will simply char but maintain their strength. And that is a fact.
Joe just seen laura drug addict Mitchell on wboc walking yesterday for drug addicts in the park LOL
Nothing else in those buildings burned hotter then the jet fuel. That's basic chemistry. No need for physics. Nice try.
No. They did nurn. Most of what you said melts to nothing past 500 degrees.
What temperature does thermite burn at? There was apparently a lot of thermite residue in the rubble. But then, how on earth could it possibly have been there?
Questions, questions...
I want to know how the burning jet fuel and desks caused a third, undamaged building to collapse upon itself.
Maybe one of these people that has mastered physics can explain that to me.
Ease up on the hoax. Everyone knows a blacksmith heats the metal to make it pliable and to shape it. He doesn't melt it into liquid form. There was mo molten steel in the twin towers collapse, just deformed and mis-shapened steel. Doesn't take melting temperatures to do that.
Videos on thermite and thermate were very interesting. I do believe that one of the two were used.
Bingo! And wanna know something? All these smart guys are cop lovers. Government fans. Nothing can be done wrong by them in their eyes. Truly the stupidest people on the planet. The drop out thugs in ghettos are smart enough to see what the cops are doing. Even seeing what the government is doing. But not these guys. Smdh.
Super thermite burns hotter than 1500 degrees. That would certainly melt steel. Especially when it's placed strategically on steel structural beams within the towers. This hoax carried out by the globalist/nwo the Bush Sr. spoke of on 9/11/91. All the commenters on here that are in denial should watch "Loose Change" on YouTube with an open mind. I know it's scary to think their are criminals within our government that would "crack a few eggs to get an omelette" ala military industrial complex build out / police state after 9/11. And the greatest gold heist ever underneath the towers. Oh can someone explain the structural fire in building 7 that collapsed in its own footprint at free fall speed?
Anonymous Anonymous said...
Ease up on the hoax. Everyone knows a blacksmith heats the metal to make it pliable and to shape it. He doesn't melt it into liquid form. There was mo molten steel in the twin towers collapse, just deformed and mis-shapened steel. Doesn't take melting temperatures to do that.
September 17, 2015 at 4:26 PM
A blacksmith has to keep re-heating the metal and hit it with a hammer. There are witnesses who saw POOLS of molten metal. There was evidence of thermite in the rubble. The concrete was pulverized into dust MIDAIR before it even touched the ground.
I won't even go into the small explosions heard just before the collapse. Or the dump trucks hauling the gold away before this event and were seen. Or the warnings some people received to NOT fly that day. Or the insurance policies. Or that the 'surviving' families of the 'victims' demanded, and received, more money from the government AFTER they had already been paid millions. Oh, and why the rush to ship out the remaining steel and rubble, OUT OF THE COUNTRY no less?
And many more things. And I haven't even begun on building 7.
But you guys are right. Monitors and chairs combined with jet fuel to create this magical chemical reaction to burn hot enough to collapse two skyscrapers, which has NEVER happened before, ANYWHERE, and hasn't happened since.
And remembering jet fuel burns at 1500f MAX: The properties of steel vary widely, depending on its alloying elements.
The austenizing temperature, the temperature where a steel transforms to an austenite crystal structure, for steel starts at 900 °C (1,650 °F) for pure iron, then, as more carbon is added, the temperature falls to a minimum 724 °C (1,335 °F) for eutectic steel (steel with only .83% by weight of carbon in it). As 2.1% carbon (by mass) is approached, the austenizing temperature climbs back up, to 1,130 °C (2,070 °F). Similarly, the melting point of steel changes based on the alloy.
The lowest temperature at which a plain carbon steel can begin to melt, its solidus, is 1,130 °C (2,070 °F). Steel never turns into a liquid below this temperature. Pure Iron ('Steel' with 0% Carbon) starts to melt at 1,492 °C (2,718 °F), and is completely liquid upon reaching 1,539 °C (2,802 °F). Steel with 2.1% Carbon by weight begins melting at 1,130 °C (2,070 °F), and is completely molten upon reaching 1,315 °C (2,399 °F). 'Steel' with more than 2.1% Carbon is no longer Steel, but is known as Cast iron.[14]
How are those physics for ya?
I will never forget that it was an inside job
No one ever remembers building 7!
Anonymous Anonymous said...
No one ever remembers building 7!
September 18, 2015 at 8:35 AM
Yeah, we do. That one is a no-brainer, well for some of us anyway. When a reporter is on live tv standing in front of building 7 and proceeds to say it has collapsed, that was a giveaway that something wasn't right. Then the owner of 7 tells fire dept. or whoever to 'pull it' is another. Not to mention the insurance policy increases just prior to 911.
If people are still that gullible to believe the official version, there is no point in discussing it. They will fight to remain dependent on, and lied to, by the government.
You people are so damn dumb... YES there was molten steel running form one of the towers, and YES there was thermite residue in the rubble... Thermite doesn't get put their by itself lie the one poster said... YES we all know metal can bend and sheer and all that crap if certain amount of heat makes it so... What you clowns forget is, once the fireball was out, you know the big plum of fire that came from the side of the building??? Was all gone and burned up after that first initial fire ball, it didn't have time or the heat to molecular change the steel property, AND THAT IS FACT.... The wood and carpet and papers and pens and pencils can't and didn't burn HOT ENOUGH to melt STEEL THAT WAS PROTECTED WITH fire retardant coatings... Secondly, having only 10 floors falling or being damaged would not make the whole damn building fall, let alone in its OWN FOOTPRINT!!!! it would have fallen off to the side and I Have seen enough demolition to know that is what happen to these buildings period!!!! oh lets not forget how hitting the last top 10 floors of this building which is rated to withstand earth quakes fell in its own foot print... impossible without demolition tools like explosives...
I don't care what fake evidence you quote from the tv... a 200 story building can not EVER fall in its own foot print without explosive help... PERIOD!!!!
After reading these posts, THANK GOD that they let the experts figure it out and not the people that were not on the scene and that didn't take part in any investigation. YouTube videos for evidence...sheesh!
Post a Comment