Popular Posts

Tuesday, April 02, 2019

BRICK KILN ROAD CLOSURE


BRICK KILN ROAD CLOSURE 
Salisbury, MD … Brick Kiln Road will be closed between Old Quantico Road and Owens Branch Road starting at 7:00 AM on Saturday, April 6, 2019, through 6:00 PM on Sunday, April 7, 2019. Wicomico County Public Works crews will be replacing a damaged cross road pipe. The Newland Park Landfill, Transfer Station and Brush Pile will all be open during regular hours over the weekend. Citizens are encouraged to use US Route #50 to Naylor Mill Road to Brick Kiln Road to access those facilities. Please contact Wicomico County Public Works – Roads Division at 410-548-4872 if you have any questions.

8 comments:

  1. Here we go again!! Let me guess it's because of the 1/8th of an inch rain we got today??

    ReplyDelete
  2. dont most people go to the dump on a saturday? Way to go !

    ReplyDelete
  3. Hey Mr Culver when do you plan on fixing the bridge off of Rt 50 next to The Hardware Store ?????? 2 yrs Now.

    ReplyDelete
  4. Wow what a bunch of whiners!

    ReplyDelete
  5. Hmm is anyone else having problems with the
    pictures on this blog loading? I'm trying to figure out
    if its a problem on my end or if it's the blog. Any feedback would be greatly appreciated.

    ReplyDelete
  6. 6:54pm - You mean Barren Creek Road? This was discussed long ago, the county doesn't own the property the bridge was on. The landowner is refusing to allow them to rebuild.

    ReplyDelete
    Replies
    1. That's right. And how much time and money was wasted on that failure?

      Delete
  7. Sure hope it doesn't take these guys as long to fix this problem, as long as it is taking this other group the fix Nanticoke Road.Say what you want, but it should not ne taking this amount of time to fix this problem. I know they will blame it on the weather (NOT). There is a group of people that are going to make phone calls to the right office to get this moving. It is just plain ridiculous the amount of time it is taking.

    ReplyDelete

Note: Only a member of this blog may post a comment.